Lenco CR-334 Instruction Manual download pdf (Page 5)

Setting The Time, The First Time

IMPORTANT: The first time you connect your new automatic time setting

clock radio to the AC

outlet, the internal computer will automatically set the time for the area you live which is the initial

default setting. The displays will scroll for a few seconds and then show the correct Year, Month,

Date, Day and Time in your area. Your clock is set and running.

If you want to move to other countries you must change the time zone.

Time zone setting (according to the Greenwich timetable)

GMT (Greenwich zero time)

1: GMT – 1 2: GMT – 2 3: GMT – 3 4: GMT – 4 5: GMT – 5 6: GMT – 6

7: GMT – 7 8: GMT – 8 9: GMT – 9 10: GMT – 10 11: GMT – 11 12: GMT – 12

13: GMT + 11

14: GMT + 10

15: GMT + 9 16: GMT + 8 17: GMT + 7 18: GMT + 6

19: GMT + 5 20: GMT + 4 21: GMT + 3 22: GMT + 2 23: GMT + 1

To change the default time zone display, press the TIME ZONE button. If the number “02” will

appear on the display, it indicates that the default zone is ZONE 2, which is “GMT -2”.

Hold the TIME ZONE button and then press either the SET < or > button until your own time zone

appears on the display, then release the buttons.

The clock display will change to the correct time in the time zone you selected.

Month / Date / Year Display

To see the correct “date” at any time, press the CALENDAR button. The correct month and date

will appear in the ALARM 1 display and the correct year will appear in the ALARM 2 display. The

month and date is displayed in the MM.DD format.

For example, May 21

2005 will be displayed as “21.5” in the ALARM 1 display and “2005” in the

ALARM 2 display. The two small displays will revert to the Alarm 1/ Alarm 2 indications a few

seconds after you release the CALENDAR button.

To manually adjust the date press and hold the CALENDER button, and press either the SET < or

> buttons to adjust the date ahead or back as desired. Each press of the SET < or > buttons will

change the date by one day. If you hold the SET < or > buttons the date will continue to change.

The display will change slowly at first, one day at a time. But if you continue holding the SET < or >

buttons the display will change rapidly. When you hold both CALENDER and TIME and than press

SET < or > the year will change.

NOTE: If you manually adjust the date, your new setting is entered into the automatic date setting

system memory. If the power is interrupted, the date will return to your new setting, not the original

setting, when the power is restored.

1 2 3 4 5 6 7 8 9 10 11 12 13

No comments

Lenco CR-334 Instruction Manual Page 5