12
If you do not change the built-in lithium battery within a reasonable period of time after you see the
warning indicator, the lithium battery may become exhausted and will no longer be able to supply
back up power to the automatic time setting system
internal computer. If the unit is disconnected
from the AC outlet after the battery is exhausted, or if a power interruption occurs, the automatic
time setting
memory will be lost and the clock will need to be reset when the power is restored. Be
sure to install a fresh lithium
battery before you reset the clock; otherwise the clock will need to be reset each time the power is
interrupted.
If the lithium battery is exhausted and you experience an interruption in the AC power supply, the
clock will reset itself to its initial default setting when the power is restored.
The initial default setting is 12:00 AM, SATurday, January 1st (1.01), 2005.
If you notice that the time on your automatic time setting
clock radio is completely incorrect, and
the DAY OF WEEK indicator is also wrong, press the CALENDAR button. If the small displays are
showing “01.1” and “2005”, you probably experienced a total memory loss. To reset the clock after
a total memory loss, proceed as follows:
1.) Follow the instructions mentioned previously and install a new CR2430 or CR2450 lithium
battery in the battery compartment.
2.) Connect the radio to your AC outlet and let the clock set itself.
3.) Press the CALENDAR button. The ALARM displays will change to “Month/Date” and “Year”.
• While holding the CALENDAR and TIME buttons, press the SET < or > button to set the
ALARM 2 display to the correct year, and then release the buttons.
• While holding the CALENDAR button, press the SET < or > button to set the ALARM 1
display to the correct “Month” and “Date”. When the correct month and date appear on the
display, release the buttons.
• The DAY OF WEEK indicator will change automatically as you adjust the “Year”,
“Month/Date” settings.
4.) Press the TIME button and the SET < or > button to set the display to the correct time.
5.) After you set the time, reconfirm that the Day, and Month/Date displays are still correct. Make
final adjustments if necessary.
The automatic time setting
clock memory is now reset and the new lithium battery will maintain
it for the next 5 to 8 years, depending on the number and duration of the power outages you
experience.
IMPORTANT NOTE:
After resetting the clock, don’t forget to reset your wake up times, and alarm mode settings, and
sleep timer settings as well.
Lithium Battery Precautions
• Dispose of the old battery properly. Do not leave it lying around where a young child or pet could
play with, or swallow it. If the battery is swallowed, contact a physician immediately.
• Battery may explode or leak if mistreated. Do not attempt to recharge it or disassemble it. Do not
dispose of the old battery in a fire.
CARE AND MAINTENANCE
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or
dirty, clean it with a soft, slightly dampened cloth.
Never allow water or any liquid to get inside the cabinet.
(3 pages)
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals