Lenco L-175 User Manual

1 L-175 Direct drive glass turntable User Manual www.lenco.com

10 AUDACITY QUICK GUIDE (PC editing program) Before Starting the Software Make sure that your USB turntable is plugged into the computer and both the

11 Select the USB audio device under the “Recording” selection as shown. Select “Software Playthrough” to hear the audio while recording. Note: Th

12 Toolbars Selection tool - for selecting the range of audio you want to edit or listen to. Envelope tool - for changing the volume over time.

13 Skip to End - moves the cursor to the end of the last track. Edit Toolbar All of the buttons on this toolbar perform actions - and with a couple

14 Track Pop-Down Menu The Track Pop-Down Menu appears when you click in a track's title. This lets you access a few special commands that apply

15 Split Stereo Track - if the selected track is a stereo track (a pair of left and right tracks joined together as a single track), this operation sp

16 Export As WAV... - exports all of the audio in your project as a WAV file, an industry-standard format for uncompressed audio. You can change the s

17 Print - Print out the main window view from audacity showing the tracks and waveforms. Exit (Quit) - closes all windows and exits Audacity, prompti

18 Duplicate - Makes a copy of all or a part of a track or set of tracks into new tracks. See the figure below: Select ... > All - Selects all of

19 seconds, exactly. You can change the units that are snapped to using the "Set Selection Format" option in the View Menu . Snap-To ... >

2 Table of content Table of content ---------------------------------------------------------------------- 2 Description --------------------------

20 menu item changes to Dock Control Toolbar, which you can use to put the toolbar back into the main window. Float Edit Toolbar - moves the Edit Tool

21 Quick Mix - This command mixes all of the selected tracks together. If you are mixing stereo tracks, or mixing tracks that are marked as Left or Ri

22 Add Label at Selection - This menu item lets you create a new label at the current selection. You can title the label by typing with the keyboard a

23 Repeat Last Effect - Selecting this command is a shortcut to applying the most recent effect with the same settings. This is a convenient way to qu

24 FFT Filter - Similar to Equalization, lets you enhance or reduce arbitrary frequencies. The curve here uses a linear scale for frequency. Invert -

25 Plugins 1 to 15 ... etc. These submenus contain any VST, Ladspa, or Nyquist plug-ins loaded by audacity. It is possible for a poorly written plug-i

26 Safety instructions IMPORTANT SAFETY INSTRUCTIONS - READ CAREFULLY BEFORE USE. CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO PREVENT A

27 Safety instructions - continued  WARNING! NEVER INSERT AN OBJECT INTO THE PRODUCT THROUGH THE VENTS OR OPENINGS. HIGH VOLTAGE FLOW

28 Service and support For information: www.lenco.com For support: http://lencosupport.zendesk.com Lenco helpdesk: Germany 0900-1520530 (Loca

29 This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure th

3 Dear customer, Thank you for buying this Lenco product. Quality and usability is our top priority. In order to let you fully enjoy this t

4 Description 1. Counterweight The counterweight is used for precise adjustment of the stylus pressure on the vinyl, to properly balance the tone a

5 Place the record here when playing. 7. 33/45 RPM Switch (33/STOP/45): Select 33 or 45 rpm for playing a vinyl, switch to “STOP” to pause the playi

6 Initial starting-up Mount and adjust 1) Place the aluminum turntable platter. 2) Insert the counterweight on the end of the tone arm, lock it i

7 Mains Connection An external switching power adaptor (DC24V/1A) is supplied with this turntable. Your unit is ready to be connected to a main voltag

8 Playing a record 1) Place the record on the turntable. If it is a 45 rpm, you need to place the adaptor on the record spindle. 2) Choose the playi

9 Maintenance TO REPLACE THE STYLUS (FIG.A) - Put the rest (11) clip on the pick-up arm. - Remove the protective cap from the stylus. - Pull the s