Lenco DC-521 User Manual download pdf (Page 2)

Follow the instructions below to insert the optional micro SD memory card into the camera.

1. Turn off the camera first.

2. Open the battery door.

3. Insert the micro SD card into the camera.

Note: There is only one right direction to insert the micro SD memory card into the slot. Do not

force the card into the memory card-slot, it may damage both the camera and the micro SD

memory card.

Note: The micro SD memory card must be formatted before taking photographs. See the

following sections for more information.

5.3 Formatting the micro SD card

1. Press the menu button ( ) in PHOTO or VIDEO mode.

2. Select the setup mode by press the right button.

3. Select the format icon by press the

W( ) button and press the SHUTTER button to

confirm.

4. Select SD card and confirm with the SHUTTER button.

5.4 Setting the resolution

The camera can be set to different resolutions.

1. Press the menu button ( ) in PHOTO mode, select the resolutions icon by

W ( ) key and

press the SHUTTER to confirm.

Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536),

5M (2560 x 1920), 8M (3264x2448), 12M (4032 x 3024)

2. Six different resolutions will be displayed. Select the desired resolution by using the up or

down buttons and press the SHUTTER button to confirm the selection.

5.5 Taking photographs

1. Turn on the camera.

2. Depending on the distance to the object being photographed, use macro switch to adjust

the distance. Select the flower symbol ( ) if you wish to take a close-up photograph

(11cm –18 cm).

If you wish to take a video or a photograph of surroundings or people (0.5m – infinity), set the

macro switch to normal mode ( ).

3. If you are not sure if there is enough lighting, turn on the automatic flash( ) by pressing the

flash button. (If the battery power is too low, the flash won’t be activated).

4. Use the LCD screen to aim the object you wish to take photograph.

Face detection function will be activated automatically if you take pictures of persons.

5. Press SHUTTER button and wait until the LCD display turn on again.

6. If ‘SMILE’ detection is ON, shutter will be activate automatically once a smile face is

detected

Caution: 1) Taking picture for fast-moving object is not recommended.

2) Image may be distorted when taking picture in a moving vehicle.

5.6 Zoom in and out

The camera can zoom in up to 8 times.

Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the

maximum zoom ratio.

5.7 Self-timer setting

You can use the self-timer function when you take a photograph of yourself or when you take a

photograph without flash of an object. To avoid shaking of the camera a tripod is recommended.

1. Set the camera to photo mode.

2. Press the MENU button ( ). The menu will appear.

3. Press the

W( ) button to select Capture Mode and confirm by pressing the SHUTTER

button.

4. Press the

W( ) button to set the delay time: 10S Timer.

5. Press the SHUTTER button to confirm. The self-timer function is now ready for use.

6. Aim at the object you wish to take photo.

7. Press the SHUTTER button to take a photograph.

The photo will be taken after the timer reaches the delay time of 10 seconds. The camera will

beep during the delay time.

5.8 Recording video clips

1. Press the MODE button to select the video clip mode ( ).

2. For setting the resolution, Press MENU ( ) button and select Resolution, then press the

SHUTTER button to confirm. Two resolutions will be displayed.

VGA (640 x 480), QVGA ( 320 x 240).

3. Press the SHUTTER button to start recording video, press the SHUTTER button again to stop

recording. The video clip will now be saved as an AVI file in the camera memory.

5.9 Playback photographs

1. Press the( ) button to get into playback mode.

2. The last picture or video clip taken will be displayed. Use the left or right buttons to flip

through the pictures or videos

3. In full screen display, press the

T( ) button to zoom in the photo.

4. To view images in thumbnail, press the

W( ) button.

5. To shift the image in zoom-in mode, press the SHUTTER button then use the

up/down/left/right buttons.

6. Press the MENU ( ) button in Playback mode, press again and hold MENU button until the

menu options displayed. Select SLIDE SHOW and select the desired slide show time. Press

the SHUTTER button to confirm. The pictures saved in your camera or your micro SD card

will be displayed in sequence automatically. To stop slide show, press SHUTTER button

again.

5.10 Playback video clips

1. When video clips are displayed, press the SHUTTER button to start playing the video and

press the SHUTTER button again to pause the playback.

2. Press right button to fast forward or press left button to rewind.

3. Press the down button to stop.

4. Press the mode button to exit.

5.11 Delete photographs and video clips

You can delete a single photograph / video clip, or delete all the photographs / video clips in the

memory.

Follow the instructions below to delete photograph.

1. Press the ( ) button to enter the playback mode.

2. Press left or right button to select photograph/video clip to be delete.

3. Press the MENU/delete button（）and select “Delete This Image(Video)” or “All” .

4. Press the SHUTTER button, then select OK to confirm.

5. Press the mode button to exit.

NOTE: Select “All” and Press the SHUTTER button to confirm, all the pictures and videos will be

deleted.

6. Connecting to a PC

The unit can be connected to the computer as mass storage device and transfer photo/video files

for storage.

7. Specifications

Senso

5.0 Me

ixel CMOS senso

12.0 Mega pixels: (4032x3024)

8.0 Mega pixels: (3264x2448)

5.0 Mega pixels: (2560x1920)

3.0 Mega pixels: (2048x1536)

1.3 Me

ixels:

(

1280x960

)

Image resolution

VGA: (640x480)

Lens F/2.8 f = 8.5mm

Focus ran

e 0.5m. ~ Infinit

Macro mode 11cm

–

18cm

Digital zoom 8x

Flash strobe Built-in ( Auto / force / off )

LCD dis

2.4" TFT color dis

White balance Auto

Cloud

Fluorescent

Tun

sten

Video mode 30f

VGA / 30f

QVGA with micro SD card

External memory card Supports SD cards up to 8GB

File format Picture: JPEG

Video: AVI

Self time

10 seconds

PC interface USB 2.0

Power source 2xAAA alkaline batteries

8. System requirement

Operating system

Windows XP / Vista or above

Mac 9.x or X.x

CPU Pentium III or above

RAM At least 64MB

Interface USB

ort

CD 4x s

eed CD ROM or above

9. Troubleshooting

Problem Cause Solution

Cannot turn on the

camera

Low battery power.

Battery placed at wrong

polarities.

Replace or install the battery

correctly.

Photos can not be saved

when taking pictures.

The memory built-in

memory hasn’t been

formatted properly.

Format the memory in setup

mode of the camera. Please

refer to section 5.3.

Cannot find removable

disk after connecting the

camera to the computer

Connection failure. Make sure all cable

connections are secured and

restart the computer if

necessary.

Flash does not work. Battery power is too low. Replace with new 2xAAA

alkaline batteries.

The batteries used up

very fast.

Incorrect or old, used up,

battery

Replace with new 2xAAA

alkaline batteries.

The photos are blurry 1. The camera is not held

steadily

2. The lens of camera is

dirty.

1. Hold the camera steadily

until it beeps when taking

video photo.

2. Clean the lens with soft dry

cloth.

List of accessories:

Camera 1x User manual 1x Handstrap 1x USB cable 1x Pouch 1x

Service and support

For information: www.lenco.com

Lenco offers service and warranty in accordance to European law, which means that in case of

repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-official service center in any way, the

warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty

obligations of the manufacturer will be voided.

Products with the CE marking comply with the EMC Directive

(2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the

Commission of the European Community.

The declaration of conformity may be consulted at

https://lencosupport.zendesk.com/forums/22413161-CE-Documents

This symbol indicates that the relevant electrical product or battery

should not be disposed of as general household waste in Europe. To

ensure the correct waste treatment of the product and battery, please

dispose them in accordance to any applicable local laws of requirement

for disposal of electrical equipment or batteries. In so doing, you will help

to conserve natural resources and improve standards of environmental

protection in treatment and disposal of electrical waste (Waste Electrical

and Electronic Equipment Directive).

AM-TDC5M2-GB-STF-R4

1 2

Comments to this Manuals

No comments

Lenco DC-521 User Manual Page 2

Comments to this Manuals

Related products and manuals for Video Lenco DC-521